Welded & Custom Hydraulic Cylinder
Most mobile equipment uses welded cylinders designed for one specific machine. The AF-HW programme lets you source these cylinders to your exact drawing, with sampling, first-article inspection and series production managed through one contact.
Upload a drawing or photos of the existing cylinder with the request form and we will come back with questions or a quotation.
Sample data. Specifications on this page are placeholders for the prototype and must be replaced with the partner factory’s verified data before launch.
Technical specifications
| Bore sizes | 30 – 250 mm (custom) |
|---|---|
| Stroke | Up to 5000 mm |
| Working pressure | Up to 250 bar (higher on request) |
| Construction | Welded body, threaded or welded head |
| Single / double acting | Both available |
| Medium | Mineral hydraulic oil |
| Fluid temperature | -30 to +90 °C |
| Piston rod | Hard-chromed steel, induction hardening optional |
| Finish | Primer and top coat in any RAL colour |
Features
- ✓ Built to your drawing or sample
- ✓ Prototype and small-batch orders accepted
- ✓ Every cylinder pressure tested before shipment
- ✓ Material certificates and test reports available
Mounting options
- ✓ Cross tube
- ✓ Clevis and pin eye
- ✓ Spherical bearing
- ✓ Trunnion
- ✓ Custom brackets to drawing
Options
- ✓ Telescopic and plunger versions
- ✓ Integrated valves (load holding / counterbalance)
- ✓ Corrosion-resistant coatings
- ✓ Private label marking
Typical applications
- ✓ Agricultural machinery
- ✓ Construction equipment
- ✓ Dump trailers and tipper trucks
- ✓ Lifting platforms and material handling
Have a part number or drawing?
Send it to us. We will match an equivalent cylinder and come back with a factory quotation.